The antique chairs, arouse made of Vienna straw and wood are a particular charm in those who have them. It occurs, however, you’ve got to repair and that with the passage of time these chairs will be damaged, replacing the straw, a fine work that will require lots of focus and practice. Repair matting activities that are damaged and bottom chairs are of ancient origin, in fact before they were a real profession. Now the artisan activities that carries out this kind of work is going increasingly diminishing, but the techniques are centered on different storylines and made with different substances.
Repair of a Vienna straw chair: to figure out if your chair is possible to replace the damaged seat in Vienna straw, you are able to simply check for all along the profile of the seat, a wooden cord put in the duct to hold prevents the Vienna straw. It will be possible to perform the repair in this instance. For the newcomers you need to totally remove chaff from your seat such as the pith. With the help of a knife, we are going to begin to impact the materiali da intreccio along the profile of the pith up to remove it fully.
Now we can cut on the roll of Vienna straw of the identical size of the session to be restored, making certain to leave 2 cm on all four sides of the seat. Dunk the Vienna straw so cut hour , so as to allow it to be easily workable and more pliable. By holding the Vienna put a small wedge in the center of each channel to the four sides of the seat base and straw tight to support the cane in the team with the construction of the seat. At this point it is recommended to prepare the rattan also immersing in water for a short while to ensure it becomes softer and more flexible.
Now shove the edges of the cane seat in the duct, using a wedge and softly hammering place the white paste or aliphatic adhesive in their conduct above the Vienna straw only added and immediately strung wicker helping with a wedge and hammering gently, so as to stop the Vienna straw and keep the tension.